Article Sidebar

Download
PDF
Statistic
Read Counter : 1004 Download : 149

Downloads

Download data is not yet available.

Main Article Content

Abstract

An application GUI (Graphical User Interface) is designed as a software simulation to compare the output signal of DFT and DTFT. DFT (Discrete Fourier Transform) and DTFT (Discrete Time Fourier Transform) are part of the digital signal processing. Digital signal processing is an analog signal processing method uses a mathematical technique to perform a transformation or retrieving information in digital form. One of the benefits of digital signal processing is to facilitate the representation of the signal, because the signal in digital form will be more visible, easily processed and has high accuracy. This GUI application designed using LabVIEW from National Instruments.  LabVIEW is a software graphical programming or a block diagram. LabVIEW program known as VI or Virtual Instrument. The input signal in this application is a square signal

Article Details

How to Cite
Astharini, D., Aulia, T., Wulandari, P., Alamtaha, R., & Afisha, R. (2019). GUI Design for Comparative Output Signal DFT and DTFT with LabVIEW. International Series on Interdisciplinary Science and Technology, 4(1), 210–213. https://doi.org/10.23960/ins.v4i1.210
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. B. A. Myers, Graphical User Interface Programming CRC HANDBOOK OF COMPUTER SCIENCE AND ENGINEERING – 2nd, LLC: CRC Press, 2004.
  2. D. E. Seborg, T. F. Edgar and D. A. Meilichamp, Process Dynamics and Control, 2nd Edition, New York: Wiley, 2004.
  3. H. Guo and J. Wu, "Application of Virtual Instrument LabVIEW in Variable," TELKOMNIKA Indonesian Journal of Electrical Engineering, vol. XII, no. 8, pp. 6119-6126, 2014.
  4. U. and M. S. Panse, "Electroretinogram (ERG) Signal Processing & Analysis in LabVIEW," Advances in Medical Informatics, vol. I, no. 1, pp. 1-5, 2011.
  5. S. Dang, R. Kakimzhanov, M. Zhang and A. Gholamzadeh, "Smart Grid-oriented Graphical User Interface Design and Data Processing Algorithm Proposal Based on LabVIEW," International Conference on Environment and Electrical Engineering, vol. XIV, no. 1, pp. 4799-4660, 2014.
  6. P. Avitabile, J. Hodgkins, T. V. Zandt, A. Butland and D. Nickgorski, "INNOVATIVE TEACHING OF FOURIER SERIES USING LABVIEW," in American Society for Engineering Education Annual Conference & Exposition, Massachusetts USA, 2006.
  7. T. Tasner, D. Lovrec, Tasner, Francisek and J. Edler, "COMPARISON OF LabVIEW AND MATLAB FOR SCIENTIFIC RESEARCH," Annals of Faculty Engineering Hunedoara - International Journal of Engineering, vol. X, no. 3, pp. 1584-1673, 2012.
  8. R. R. Serrezuela, A. F. Chavarro, M. A. T. Cardozo, A. G. R. Caicedo and C. A. Cabrera, "AUDIO SIGNALS PROCESSING WITH DIGITAL FILTERS IMPLEMENTATION USING MYDSP," ARPN Journal of Engineering and Applied Sciences, vol. XII, no. 16, pp. 4848-4853, 2017.
  9. L. SEVGI and C. ULUISIK, "A Labview-Based Virtual Instrument for Engineering Education: A Numerical Fourier Transform Tool," Turk J Elec Engin, vol. XIV, no. 1, pp. 129-152, 2006.
  10. M. A. A. Kasim, C. Y. Low, M. A. Ayub, N. A. C. Zakaria, M. H. M. Saleh, K. Johar and H. Hamli, "User-Friendly LabVIEW GUI for Prosthetic Hand Control using Emotiv EEG Headset," IEEE International Symposium on Robotics and Intelligent Sensors, vol. 105, pp. 276-281, 2016.